AeroBolt III for Ravin R500 (3) with Pre-Installed Firenock End Cap

Firenock®
SKU:
AB3RA5-AI-HH
$157.95
Current Stock:
Adding to cart… The item has been added

The Aerobolt III-200 20" for Ravin 500 fps flies straighter and retains more energy than most crossbow arrows available on the market at the same launch speed.  It comes in 20" length only.  303 Stainless AIH30S option is 32grains heavy than the standard 7075 Aluminum AIH30A and meant for archers who demand/prefer a heavier impact force.

Some Firenock lighted nocks are designed to work with Ravin 500fps crossbows that have to work with clip-on style nocks.  Firenock U+/U+5 style is to fit a crossbow arrow with an Internal Diameter of 0.300" and string serving of 0.133" OD without the presence of a bushing that would change the ID of the shaft, i.e., one must remove the bushing on the factory Ravin Arrow before it can be correctly installed.  Firenock AeroBolt III has no bushing and does not need any.  It is known that some Ravin 500 fps crossbows have string serving OD size that is smaller than 0.133", which U+/U+5 style nock will not fit well.  While some older ravin string serving is at 0.127", which a "C+" nock is what you should be using instead. Please discuss the ramifications with your bow shop or custom string maker.

Features:

  • AeroBolt 300 20" shaft
  • AeroConcept System equipped for less oscillation and a straighter, flatter flight
  • First dynamic bend indexed for consistent and repeatable accuracy
  • Fletched with Aerovane II with red, yellow and white for minimum drag and maximum spin
  • Firenock Lighted Nock System "U+/U+5/C+" Style with red LED hunting circuits for clear and visible flight
  • Pre-installed with XF end cap.

Contents

  • 3 x Aerobolt III-200-20", which each:
    • pre-installed with AeroInsert [AIH30A] or [AIH30S]
    • mated with a 6" carbon inner tube [CTI300]
    • indexed with PAPS
    • three Aerovane II [AV2] fletch with Aerovane Jig in white, yellow, and red (white is the cock vane)
    • pre-installed Extreme Shock End Caps [XF]
  • 1 x U+ U+5, or C+: Orange anodized Aluminum Nock (3 pack)
  • 1 x circuit back: (HR)hunting, (IR) blinking, ot(TR) Target circuits in red (3 pack)
  • 1 x BR: batteries (3 pack)

Notes

  • U+ is designed to fit the center serving with 0.133" OD and has an opening of 0.123". This means it needs substantial force to be clipped onto the string as aluminum nock, unlike Polycarbonate nock, which has ZERO give.
  • U+5 is designed to fit the center serving with 0.133" OD and has an opening of 0.128". This means it needs less force to be clipped onto the string as aluminum nock for those super tight serving that does not give much.

  • C+ is to fit the original center serving with 0.127" OD and has an opening of 0.107". This means it needs substantial force to be clipped onto the string as Aluminun nock, unlike Polycarbonate nock, which has ZERO give.

  • Firenock AeroConcept System cannot be removed as it becomes a part of the AB3-200 during the manufacturing process.