Aerovane III (18/100)

Aerovane®
SKU:
AV3r
$10.95
Current Stock:
Adding to cart… The item has been added

All in all, there are three central contributing factors to Aerovane's success.

  1. Rigid Airfoil : one of the hardest vanes on the market, Aerovane is also designed as a slim pyramid to ensure rigidity. With that stiff design, wow and flutter (together, also known as harmonics or oscillation frequency) are minimized.

  2. Round Leading Edge : Aerovane is modeled after an owl's wing. With its rounded edges, Aerovane allows air to flow over with minimum air molecule to air molecule disturbance. This also minimizes the formation of a delta vortex, which robs speed and creates sound.

  3. Micro-textured Surface : There are 3 zones of micro-texturing on each side of the Aerovane II and 4 zones on the Aerovane III. Designed to minimize back end turbulence and vacuum back pressure, this technique minimizes surface to air drag (i.e. friction).

Supported Broadheads

  • Firenock: SwingBlade™, Dagger 100/125/Ti, Traumahawk
  • Hartcraft: Trophy I
  • Ramcat: SBG 1”
  • Slick Trick: 100. 125

Contents

  • 18 / 100 Aerovane III in 1 of 12 colors

Notes

  1. Aerovanes work best fletched straight.
  2. Aerovanes work best if fletched with the Firenock Aerovane Jig and Aerovane Clamp.
  3. Aerovanes work best if fletched when given steps are followed very carefully.
  4. Aerovanes can be fletched with a 1.5 degree offset if your arrows are shooting at low speeds (~150 fps).
  5. Aerovanes work best with a bow with close to perfect nock travel.
  6. Aerovanes work best with arrows that are about or longer than your draw length.
  7. Aerovane II works best with a full containment rest (e.g. AeroRest, Hostage Pro, QuickTune 360) with uneven nock travel bows.
  8. Aerovane II can work with a worn-down Whisker Biscuit Arrow rest as Aerovane II has a thick frontal end, which can open the bristles and let the vane pass through the rest with minimal drag.
  9. Aerovane III cannot be shot with a worn out Whisker Biscuit arrow rest.
  10. Aerovane III requires an aerodynamically efficient broadhead (see above for a complete list of acceptable broadheads).
Height:
10mm or 0.393"
Length:
50mm or 1.967"
Weight:
0.336gm or 5.18gn
Texture Zones:
Four
Lift Efficiency:
120k Reynolds
Crosswind Signature:
1" in diameter

Reviews

  • 5
    Aerovane III

    Posted by Bill Cinti on Aug 14th 2023

    Great vane no noise, less wind deflection.

  • 5
    aerovane 3

    Posted by Howard on Feb 13th 2023

    BEST high tech vain that I have ever used. Long lasting, tough, and spins the arrow with less drag. A++

  • 5
    Aerovane III

    Posted by Thomas on Feb 27th 2022

    The Aerovane III is simply the best and only vanes I will ever use!

  • 5
    aerovane 3

    Posted by Howard on Dec 4th 2021

    Using these vanes for years now and they have been great.

  • 4
    Aerovane 3

    Posted by Sean on Sep 25th 2021

    Take your time, and use a ruler to check that your vanes are perfectly straight or ever so slightly offset to the right (an angle of about 1/8" over 12" distance) compared to the shaft of the arrow. Check every vane. You'll notice ones that don't fly as well, but they immediately stabilize the arrow. Bad form or bad execution will send it off target, widening groups way more than standard vanes. Perfect bare shaft flight will result in the most stable arrow I've ever heard of or seen. Takes time, effort, and lots of verifying and double checking, but the results are insane. If you have the skill and/or the patience, do it. You won't regret it.

  • 5
    areovane 3

    Posted by Jason Byington on Jun 21st 2021

    wish they had a little more cup in the bases. have random spot that dont get glued down. great vane in flight.

  • 5
    Aerovane III

    Posted by Thomas Casey on Mar 28th 2021

    I love the Aerovane, it works for me and my style of shooting. Field, 3D and Hunting.